- Abstract Product Id
- Concrete Product Id
You are about to buy the standard model.
Your configuration is not saved.
If you want to buy a customized bike, click here.
Or do you want to proceed with the purchase of the standard model?
The triple protection against punctures and pinch flats.
The Tannus Armour puncture protection is a solution to the most common problems of bicycle tubes. What’s more, it ensures more grip as well as an extra portion of comfort. It was originally designed for strongly stressed bikes, such as e-bikes, cargo bikes, travel bikes or bike sharing fleets that have no room for flat tyres, due to their continuous use. Now, with the 29 x 1.95 – 2.50 version, mountain bikes used for example by marathon racers or downhill riders can also benefit from the reliable puncture protection.
The light foam layer is mounted between tyre and inner tube and surrounds the tube down to the rim base. The Tannus Armour adds near 360° protection from glass, thorns and sharp rocks. In addition to this, the cushioning layer allows you to ride with lower air pressure and generate thus more grip and comfort, without having to worry about punctures and dreaded snakebites.
Millions of tiny air bubbles provide additional shock and vibration cushioning in the Aither 1.1 polymer foam by Tannus. The special material ensures a significantly smoother ride over roots and obstacles. Moreover, the improved puncture protection allows you to ride tyres with lighter casings and thus reduce the system weight. Even if you run out of air for once, this will be no problem: With the foam insert, you can ride on at low speed for a limited period – which will spare you pushing your bike on the last metres.
For smaller wheel sizes (29 x 1.95 – 2.10 | 50/54-622) the lips of the Tannus Armour inserts have to be shortened by approx. 10 mm with scissors! Please also note that the puncture protection inserts require space inside the tyre and you will therefore require a smaller tube. For compatible tube sizes, please see the Specs.
In order to fully benefit from the advantages regarding grip and cushioning, Tannus recommends reducing the usual air pressure of road bikes by about one third. For mountain bikes, however, Tannus recommends reducing the air pressure by approx. 0,4 bar compared to tubeless systems and approx. 0,7 bar compared to standard tube systems.
• 3 in 1 puncture protection insert for 29“ mountain bike tyres
• Installation between tube and tyre
• Surrounding protection from punctures and pinch flats
• Prevents deformations caused by lateral forces even with low air pressure
• Optimised profile with material thicknesses from approx. 2 – 15 mm
• Smooth and comfortable ride
• Better traction thanks to lower air pressure
• Aither 1.1 polymer foam for improved shock and vibration cushioning
• Allows riding on after breakdowns for up to 10 km/h (for a limited period)
• Pinch protection when installing tube
• Can be easily removed and used again, recyclable
• Designed for mileages of up to +10.000 km
• Material: Aither 1.1 polymer foam
• Material thickness approx. 13 – 15 mm tread protection, approx. 2 – 5 mm side protection, approx. 2 mm rim protection
• Compatible tyre sizes: 29“ x 1.95 – 2.50 / 50-622 -> 63-622
• Compatible tube sizes for smaller tyres (29 x 1.95 – 2.10 / 50-622 -> 54-622): 700 x 44 – 50 C / 44-622 -> 50-622
• Compatible tube sizes for larger tyres (29 x 2.15 – 2.50 / 55-622 -> 63-622): 29 x 1.95 – 2.10 / 47-622 -> 54-622
• Inner rim width: approx. 19 – 33 mm
• Weight: approx. 320g/piece
In the box:
• 1 x Tannus Armour puncture protection foam insert 29 x 1.95 – 2.50
more available Tannus Armour 3-in-1 puncture protection inserts:
• Tannus Armour 3-in-1 puncture protection inlay for 27.5“ MTB tyres (prod. code 2295991)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ road tyres (prod. code 2295988)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ hybrid tyres (prod. code 2295989)
• Tannus Armour 3-in-1 puncture protection inlay for 28“ touring tyres (prod. code 2295990)