- Abstract Product Id
- Concrete Product Id
You are about to buy the standard model.
Your configuration is not saved.
If you want to buy a customized bike, click here.
Or do you want to proceed with the purchase of the standard model?
This high-end wheelset by Citec is extremely tough yet very lightweight. This is also thanks to the concave system design of the aerodynamic V-profile rim. An arch construction inside the rim provides relief for the highly loaded rim base when used with few spokes and transfers the forces applied into compressive forces. In addition, the ETS lacing system increases stiffness. This means the rear wheel has twice as many spokes on the drive-side as on the opposite site, resulting in symmetric spoke tension. Special, bladed spokes reduce the area that is exposed to the wind and contribute to the wheelset’s outstanding aerodynamics.
Rim material: alloy, milled, wear indicator
Rim width/depth: 19.2 mm/27 mm
For Presta valve
For clincher and folding tyres
ETRTO: 622 x 15 C
Spoke type: special, bladed spoke, Citec Power-Block system
Spoke pattern 16/21: radial & single cross/radial
Spoke pattern 18/24: radial & single cross/radial
Nipples: aluminium, recessed
• Front hub: smooth-running, three-part hub with sealed groove ball bearings, maximum flange spacing for high stiffness
Rear hub: smooth-running, two-part hub, DT Swiss 240S base, aluminium freehub body
Compatible with 9/10/11-speed Shimano/SRAM
Front axle: 100 mm QR
Rear axle: 130 mm QR
Weight 16/21 spokes: approx. 1,390 g
Weight 18/24 spokes: approx. 1,450 g
Max. system weight (cyclist, bike, gear and luggage): 16/21 spokes: 100 kg
18/24 spokes: 110 kg
In the box: Citec 3000S Aero wheelset with 9/10 speed spacerNOTE: Supplied without quick-release skewers and rim tape
• 5 years guarantee on spoke breakage*
- Material: carbon:
- Tubeless ready:
- Manufacturer`s ref.:
- 5 x 130 mm, 5 x 100 mm
- Freehub body:
- Shimano/compatible with Shimano/SRAM