Fox 36 Factory 2022 Float FIT4 BOOST 150 mm MTB Suspension Fork 29”

Since its launch in 2005, the 36 Factory has been the reliable workhorse of FOX for the toughest trails in the world. With the introduction of the FOX 38 in 2021, the US suspension specialists slightly revised their in-house classification and "downgraded" the 36 to an All-Mountain fork. Since the understanding of All-Mountain and Enduro is quite different in the USA than it is here, this does not mean it is less powerful – on the contrary!

With a revised design on the outside and proven FIT4 damping on the inside, the 2022 FOX 36 FIT4 impresses with an outstanding combination of performance, tunability, high stiffness and low weight. The 3 directly adjustable compression settings (Open, Medium, Firm) allow a lightning-fast adjustment to different terrain conditions. Moreover, the suspension fork comes with 22 clicks low-speed compression in open mode to perfectly adapt the riding qualities to the pilot’s preferences.

Details:
• Factory model
• Updated fork casting for optimised stiffness with low weight
• Proven FIT4 3-Pos damping cartridge
• Jutting, rounded lower leg arch to provide more space between arch and head tube
• Lower Leg Bleeders: valves for bleeding the lower tubes (pressure equalization)
• Lower Leg Channels: air or oil channels to reduce the internal pressure and improve the lubrication of the upper bushings and foam rings
• Floating thru axle
• Float EVOL air spring (spring rate can be adjusted with volume spacers)
• Brake disc compatibility up to max. Ø 230 mm

Technical details:
• Intended use: Trail, All-Mountain, Enduro
• Material: aluminium (fork crown/upper tubes), magnesium (lower tubes)
• Finish (upper tubes): Kashima coating (gold)
• Wheel size: 29"
• Steerer: tapered 1 1/8" - 1.5" (aluminium, threadless, approx. 263 mm)
• Travel: 150 mm
• Upper tube Ø: 36 mm
• Suspension: Float EVOL
• Damping: closed FIT4 3 position cartridge (Open, Medium, Firm) and additional Open-Mode Adjust
• Adjustments: air pressure, external rebound, external low-speed compression (3 position + 22 clicks in open mode)
• Remote: no
• Disc brake mount: PostMount 7" (180 mm Direct Mount)
• Max. brake disc Ø: 230 mm
• Fork length: 561 mm
• Front hub spacing: 15 x 110 mm (Boost)
• Weight: approx. 2005 g

Available with offset of:
• 44 mm
• 51 mm
Please indicate your choice.

In the box:
• 1 FOX 36 Factory FIT4 suspension fork incl. manual
• 1 QR thru axle
• 1 (brake) hose guide
• 1 Ahead star nut
• 3 volume spacers

Attention:
Maximum tyre size 29“ x 2.6" (when using tyres larger than 2.4”, you should check the tyre clearance with the fork fully compressed. There should be a distance of at least 6 mm to the fork crown.)