To preserve the value of your bicycle and to avoid unnecessary repairs, you should maintain it regularly. For cleaning your bike, it is recommended to use tenside or phosphate cleaners, because they do not harm the sensitive rubber parts of your bike. The chain is cleaned best with an old rag and then oiled anew sparingly. All joints and movable parts of a bike should be maintained with oil as well. In order to take care of the frame, you may use a preserving wax layer.
The high quality precision tool is a must-have for a secure mounting of attachment parts such as stems, handlebars, seat posts etc. With 2-24 Nm the ROSE torque wrench set covers a wide adjustment range and is ideal for assembly works on your bike. · incl. 3, 4, 5, 6, 8, 10 mm Allen key + star wrench T-20, T-25, T-30 · incl. 8 cm long 5 mm Allen key · easily switchable 1/4" drive · easily legible Nm scale with window · in practical hard shell box
Ideal for home and on the go! With this well-equipped tool box you can do almost all standard maintenance works on your bike. Contents: chainring bolt tool/wrench for integrated crank extractor, sprocket removal tool with 1/2" drive and 24 mm wrench opening incl. guide pin, Phillips screwdriver, small flat-blade screwdriver to adjust the rear derailleur, sprocket tool/remover (chain whip), for 7-/8-/9-/10-/11-speed, bottom bracket tool with 1/2" drive and 24 mm wrench opening for ISIS, Shimano square and Octalink bottom bracket, bottom bracket cup tool for Shimano Hollowtech II (for the installation/removal of SM-BBR60, BB-MT800 bottom bracket cups, you'll additionally need the adapter TL-FC25, item no.: 1995246; for the installation/removal of a SM-BB9000, BB93, BB-R9100, you'll need the adapter TL-FC24, item no.: 1919121) and compatible bottom bracket cups, star cap tool for Hollowtech II cranksets, crank extractor for square, Octalink and ISIS cranks, spoke wrench with wrench opening: 3,2/3,3/3,5 mm, pedal key with 15 mm wrench opening and 14/15 mm socket, chain tool, suitable for 7-/8-/9-/10-speed chains and Shimano 11-speed with replacement pin and 9-speed replacement pin in the handle, 2 cone wrenches with wrench opening 13/14 and 15/16 mm, 2 plastic tyre levers in long version, repair kit, star wrench T-20/25/30 "L" shape, Allen key set with 2/2,5/3/4/5/6 mm, 4/5/6 with ball head, 8 mm Allen key with 1/2" adapter for tools with 1/2" drive.
Very stable, assembly stand, variable height. Its paint-friendly holder claw has an enormously practical quick-release system. The clamp arm is 360° rotatable in order to be able to carry the bike at different points (tube Ø 22-52 mm) and to make even tricky spots easily accessible. For a fast and safe assembly, clamp arm and height adjustment are comfortably variable via quick release closures. · can be disassembled · incl. tool deposit · working height approx. 100-160 cm · max. load approx. 18 kg
This robust tool box offers a multitude of tools ambitious hobby mechanics need for road bike, MTB or trekking bike maintenance. A practical division into three sections and accurately fitting key compartments allow easy access to the required tools. Contains: Chainring bolt tool/key for integrated crank extractor, HG/IG sprocket removal tool with lever arm and guide pin, cross-head/slot-head screwdrivers, sprocket remover for 7-/8-/9-/10-/11-speed (chain whip), bottom bracket tool with lever arm for Shimano and similar cartridge bottom brackets, bottom bracket cup tool for Shimano Hollowtech II (not for BB-9000, BB-R9100, SM-BB93, SM-BBR60) and similar bottom bracket cups, special tool for Shimano BB-M950 bottom brackets and chainrings of 4-arm cranks FC-M950, 951, 952, 750, 739, 570, 569, MC40, star cap tool for Hollowtech II cranks, crank extractor for square, Octalink and ISIS cranks with integrated hexagon socket wrench, 3 spoke wrenches with 3,3/3,4/3,5 mm wrench opening, chain tool suitable for 7-/8-/9-/10-speed chains and Shimano 11-speed, incl. spare pin, 8 cone wrenches with wrench opening: 2 x 13 mm, 2 x 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, open-end wrench 8 and 10 mm, open-end wrench 12 and 14 mm, double open-end wrench 15/16 mm + 15/17 mm, 2 headset wrenches 30/32 and 36/40 mm, hex key kit with ball head 1,5/2/ 2,5/3/4/5/6/8/10 mm, "L" shaped star wrench T-25, cable cutter for inner cables and cable casings, set with 3 plastic tyre levers, puncture repair kit, cleaning brush with claw, chain cleaner.
Transportable assembly stand, can be mounted/dismounted in a very short time. A user-friendly height adjustment, combined with a 360° rotatable holder claw, always brings your bike into the optimal position for working on it. Its claw with quick-release system guarantees a safe hold, without damaging frame or paint. Its tiltable foot construction gives the S 3000 a secure stand for the realisation of even the finest adjustment works. Thanks to the tool tray, your workplace stays neat and you do not have to search for tools anymore. · working height: approx. 90-145 cm · rubberised holder claw for tube Ø 22-52 mm · max. load approx. 18 kg · foldable to save space · stable · incl. tool tray · adjustment via quick release system
The name says it all. Due to its solid construction, the 2-Zent.A:-XL is designed for frequent use. With a weight of approx. 7,7 kg, it stands securely and safely on your workbench. It can also be firmly attached to the workbench by means of screws. With the help of the ergonomic knobs, you can clamp the hub and align the centering arms as well as the side arm. · clamping measure: max. 150 mm · material: steel · for 16"-29" wheels · check for vertical and lateral run-out possible · for thru axle hubs we recommend to use Shimano adapters TL-FH12/TL-HB16 (item no. 2001234/2001252) · base dimensions: W: 20,5 cm/L: 24,5 cm
Are you a passionate hobby mechanic or would you like to become one soon? Then the All2gether Pro Bike repair box is just the right thing for you. The comprehensive contents offer you a very good and varied equipment if you would like to work on diverse bike models. Thanks to the broad range of tools, you will be perfectly equipped for current standards and for older ones as well. The robust case can also be carried along comfortably on tours etc., a snap closure avoids unintended opening of the case and a loss of the tools. After using the tools, they can be neatly clicked into the prefabricated pockets. Contents: 1x chainring bolt tool with integrated nut wrench (9/10 mm) and 2-pin tool to mount/dismount integrated crank extractors (16.5 mm distance) 3x composite tyre levers with flexible metal core 1x chain whip to fit/remove the chain 1x nipple wrench (3.2mm/3.3mm/3.5mm/4.0mm) 1x cleaning brush 1x 15 mm pedal wrench 1x 8 mm hex wrench with ½” adapter for tools with ½” drive 1x chain wear indicator for 7-11-speed chains with ½” pitch 1x chain link pliers to open/join 8-/9-/10- and 11-speed chains with connecting link 1x cable cutter for cables and cable casings (not suitable for hydraulic brake cables) 1x crank cap tool for Shimano Hollowtech II cranks 1x Shimano/Sram HG/IG lockring removal tool with ½” drive or 24 mm open-end wrench 1x bottom bracket tool for Octalink, square and ISIS bottom brackets with internal gears, for 24 mm open-end wrenches or ½” ratchets 1x chain rivet extractor for 7-/8-/9-/10- and 11-speed chains 1x lockring removal tool for all 7-/8-/9-/10- and 11-speed cassettes, 17 mm box wrench and 2x15 mm pedal wrench 1x bottom bracket tool for Hollowtech II or similar, as well as for SM BB9000, SM-BB93, BB-R9100 and SM-BBR60, BB-MT800 1x star wrench L set (T-10/T-15/T-20/T-25/T-27/T-30/T-40/T-45/T-50) 1x hex wrench L set (2 mm/2.5 mm/3 mm/4 mm/5 mm/6 mm) 1x slotted screwdriver 1x crank extractor for Octalink, square and ISIS bottom brackets 1x Pressfit removal tool for Shimano Pressfit BB86/92 and BB30 bearing cups 1x Pressfit fitting tool with threaded rod and press pistons for Shimano/Sram BB86/92 bearing cups and BB30/PF30 bearing cups 1x torque wrench 2-24 nm (1/4”), incl. 3/4/5/6/8/10 mm hex and star T-20/T-25/T-30, 5 mm hex extension (8 cm) Total weight: approx. 5250 g
The multifunctional PCS-10 assembly stand can be completely adjusted without tools thanks to quick-release levers. This allows you to quickly adjust the height and inclination of your bike. The stand can be folded down to a compact size with a flick of the wrist for an easy transport and storage. The clamping pressure is precisely adjustable to protect thin or carbon tubes. A practical and robust helper that is not only suitable for a hobby workshop. · three-point system for high stability on almost every ground · adjustment of height, inclination and clamping pressure via quick-release levers · base tubes can be clicked in and loosened with snap fasteners · adjustable height (99–145 cm) · clamp rotates 360 degrees · clamp adjustable to fit tubes with a Ø between 24-76 mm (suitable for various tube shapes) · folds down to 104 cm for easy transport and storage · max. load: 36 kg
With the ROSE Pinpusher IV, you get a very robust chain tool that stands out for its functionality thanks to the use of tool steel, a rubberised handle and a long aluminium lever. An additional fixing device holds the chain ends together and allows riveting the chain when tensioned. · integrated pliers to open chain links · adjustable rivet pin depth · suitable for 7-/8-/9- and 11-speed chains · suitable for Shimano 10-speed chains · incl. replacement pin
The Nano TorqBar DX is an extremely compact and practical torque wrench. A precisely manufactured, high-quality tool for home mechanics, bike workshop or your own jersey or saddle bag. Especially suitable for high-tech carbon frames, components and electronic shifting systems, who need an exact tightening torque. Contains three preset TorqBits (4 Nm, 5 Nm, 6 Nm) and the 5 most common tool bits (3 mm/4 mm/5 mm/T20/T25). Moreover, you can store the two most important bits for fastest access and convenient transport in the handle of the TorqBar DX wrench. · 15 functions · switchable fine tooth ratchet · handle contains compartment for two tool bits · incl. transport case for the included star and tool bits · incl. TorqBits (4, 5 and 6 Nm) · incl. tool bits (hex 3, 4, 5 mm and star T20, T25) · material: tool: hardened steel housing: aluminium/fibreglass composite case: fibreglass composite · dimensions (L x W x H): 12 x 1,6 x 1,6 cm · weight: approx. 62 g (incl. one Torq and two tool bits) Manufacturer's ref. 154 200 83 / TT2570
This thread cutting tool helps to get the threads in the crankset casing optimally coaxial. If they are not coaxial, the bearing gets stressed. It will then run stiffly and wear out prematurely. · available for BSA or Italian thread (pair) Please specify thread type.
One for everything - this assembly stand is indispensible for your hobby workshop. Whether for adjusting the shifting, changing bearings or assembling a complete bike - this stand does not shrink from hard work. Thanks to the stable construction and high variability, you can work on road bikes/trekking bikes or mountain bikes. The recessed clamping shell ensures a secure clamping of the hub which makes the stand suitable for thru axle systems, too. Using the included adapter, you can also clamp the bike without front or rear wheel. · tool tray · variable working height thanks to an adjustable bottom bracket supporting surface · integrated centering function (only for lateral run-out) · foldable to approx. 100 cm x 40 cm x 10 cm · base dimensions when folded out: L: 86 cm/W: 34 cm
A foldable entry-level repair stand in high Park Tool quality. Two long base tubes ensure a safe stand. The bike can be clamped in and tilted without tools thanks to robust clamping levers or threaded rods. The height can be adjusted with two hex screws. A robust helper that should be part of every hobby workshop. · three-point system for high stability on almost every ground · adjustable height (99–145 cm) · clamp rotates 360 degrees · clamp adjustable to fit tubes with a Ø between 24-76 mm (suitable for various tube shapes) · folds down to 104 cm for easy transport and storage · max. load: 36 kg
Such a tool is absolutely indispensable for the correct mounting of headsets, because inappropriate tools (e.g. hammers) often damage the sensitive bearing cups. This Cyclus high-quality tool offers the attributes of a professional tool, but remains affordable nevertheless. With ergonomic hand rests and a long lever for optimal power transmission. · With ball bearing · 360 mm threaded bar · Press bush with 16 mm opening · T-handle for easy handling Version 1" and 1 1/8": for frames with inner Ø 30 and 34 mm Version 1 1/2": for frames with inner Ø 49, 55 or 56 mm Optional accessories: Cyclus 1 1/8" ZS press bush (item no. 2258796) Including: Thread spindle incl. two press bushes, threaded sleeve and thrust bearing Manufacturer's ref. 1";1 1/8": 720009 Manufacturer's ref. 1 1/2": 720181
Safe stand for your home workshop – the PrepStand Elite assembly stand by Topeak secures your bike optimally during the assembly. The stand can be folded together and offers high stability, thanks to its three-legged foot. The integrated compartment for small items and the rotatable mounting arm top off the package. Details: • easy-to-use assembly stand made of 6061 T6 aluminium • mounting arm: rubber clamping jaws for tubes with diameter 19 – 45 mm, 360° freely rotatable • integrated compartment for small parts • folding mechanism by means of two precise quick-release closures • stable three-legged foot • rubberised stand feet with HD folding mechanism • fold-out crank mechanism to precisely adjust the frame tube clamp • working height: 122 - 183 cm • max. load capacity: 25 kg • including transport bag • dimensions: approx. 135 cm (diameter stand space) / approx. 117 x 17,8 cm (folded) • weight: approx. 6,0 kg Manufacturer's ref. 159 000 19 / TW002-1