CyclOn Pro Chain Hot Wax

With the Pro Chain Hot Wax from CyclOn, you can bring the wax from the professional peloton straight into your workshop. Developed in collaboration with professional teams, the hot wax from the Dutch manufacturer offers exactly the properties you need to get the best out of your drive in almost all conditions.

With Pro Chain Hot Wax, you not only achieve smooth and efficient lubrication, but also protect your material at the same time. The wax and the bag are specially designed for use in a wax heater or pot.

Details:
• Hot chain wax at Pro Tour level
• Tested & proven under racing conditions
• Developed and manufactured in the Netherlands
• Lasts about 500 to 700 kilometres depending on riding conditions
• Suitable for all weather conditions and areas of use
• Penetrates deep into the chain interior thanks to the hot wax process
• Prevents stains on clothing and body from chain contact
• Leaves behind a dry, dirt and water-repellent wax layer

Technical details:
• Contents: 400 g bag

In the box:
• 1 CyclOn Pro Chain Hot Wax, 400 g


Tip:
The Pro Chain product range from CyclOn offers you everything you need to switch to efficient and gentle hot wax lubrication. From the Pro Chain Stripper chain cleaner (prod. code: 1641770001) for preparation to quick relubrication of the waxed chains with the Pro Chain Wax (prod. code: 1641780001), everything is perfectly coordinated.


Note:
Clean the chain thoroughly with the CyclOn Pro Chain Stripper. Remove all oil and grease residues completely and dry the chain carefully. Heat the wax to 75-85°C in a wax heater, pot or by placing the bag in boiling water. Wait until the wax has completely melted and immerse the chain completely. Leave the wax to soak in for 15 minutes and remove the chain. Hang it up so that the wax hardens completely.

ATTENTION:
For safety reasons, you should wear gloves and safety goggles when using the hot wax.

Manufacturer: CyclOn B.V., Scheltseweg 4C, 5374 EB Schaijk, Netherlands, www.cyclonbikecare.com