Schwalbe Clik Valve (SCV) Tubeless Valve (set of 2)

Schwalbe Clik Valves were designed to make tyre inflation child’s play. With this tubeless valve set, you can equip your wheels with the new standard in a flash.

All you have to do before inflating the tyre is attach a Clik Valve pump head to the valve. And that's it already! You can start inflating the tyre immediately. The air flow is up to 50 per cent higher than with Presta valves. This is ideal for the initial fitting of tubeless tyres. When you are finished, you can simply pull off the pump head again, without the risk of air loss from the tyre or inner tube.

Details:
• Tubeless valve set consisting of two Clik Valve valves
• Enables up to 50 % more air flow than a Presta valve
• Simple inflation by attaching a separately available Clik Valve pump head or adapter
• Requires only low operating forces
• No pressure loss when removing the pump head from the valve
• Also compatible with many pump heads for Presta valves*

Technical details:
• Material: aluminium, plastic
• Valve type: Clik Valve (SCV)
• For valve hole: Ø 6.5 mm

Available in valve length:
• 40 mm (for rims up to 25 mm depth); weight: approx. 12 g (per pair)
• 60 mm (for rims up to 45 mm depth); weight: approx. 13 g (per pair)
• 80 mm (for rims up to 65 mm depth); weight: approx. 16 g (per pair)
• 100 mm (for rims up to 85 mm depth); weight: approx. 19 g (per pair)
Please indicate your choice.

In the box:
• 2 Schwalbe Clik Valve tubeless valves incl. valve nut and O-ring

*Note:
* If you don't have a pump with a Clik Valve pump head at hand, you can often also use pump heads for Presta valves with clamping function for the Clik Valve. Only the air pressure test is not possible. 

Tip:
The recommended minimum length for tubeless valves is the depth of the rim plus 15 mm.

Manufacturer: Ralf Bohle GmbH, Otto Hahn Str. 1, 51571 Reichshof, Germany, www.schwalbe.com