00 800 22 77 55 55
Mon.-Fri. 08.00 a.m. - 18.30 CET
Sat. 09.00 - 13.00 CET
Interface suitable for N360/380 rear hubs with electronic control (H-SYNC).
· New version (barcode/SN below the box)
Low in stock!
For fast information on the go. The Shimano SC-MT800 is the information and shifting centre for the electronic Shimano Di2 system. If you wish, it sho...
Same features as described for item no.1873892, but, in contrast to SM-EW90-A (3 pin contacts), this junction has 5 pin contacts. It represents the in...
Low in stock!
The Shimano Di2 EW-RS910 junction A is fitted inside the frame (down tube, check whether your frame is approved) or bar end. Thus allows you to route...
This junction is fixed underneath the stem and represents the interface between the shift/brake lever combination ST-9070/6870 and the SM-JC40/SM-J41...
Low in stock!
This unit serves as an interface between shifter and power unit.
· Battery charge indicator
· Installation underneath the stem
· Incl. mounting mater...
The alien ET definitely would have liked the Shimano Dura Ace Di2 ANT+ transmitter. Even though ANT+ or Bluetooth connections do not reach from earth...
Special charge for an internal SM-BTR2 battery. To charge the battery, the SM-EW90 A or SM-EW90 B (or SC-M9050 for MTBs) interface is required (Juncti...
External battery case for the SM-BTR2 cylindrical battery stick. The case can be mounted on a bike'sbottle cage bosses. Another advantage is the integ...
The battery mount is installed underneath or instead of the bottle cage. The EW-SD50 cable connects the battery to the junction SM-JC40.
This battery holder takes the place of the bottle cage.
The EW-SD50 cable is also connected to it, which makes the connection to the junction SM-JC40....
Fast charger which fully recharges the SM-BTR-1 battery, item no. 1110076, within approx. 1,5 hours.
· 220 V
· with indicator
· fully recharged in approx. 1,5 hours
· fully recharged battery lasts for a distance of approx. 750 - 1000 km (depending on the weat...
This battery mount can be mounted underneath or instead of the bottle cage.
The EW-SD50 cable connects the battery mount to the Junction SM-JC40.
The battery mount is fitted under or instead of the bottle cage (size S only instead of the bottle cage). The cable EW-SD50 is connected to the batter...
Bitte beachte, dass dieser Artikel als B-Ware angeboten wird. B-Ware kann Gebrauchsspuren oder andere optische Mängel aufweisen, wurde jedoch überprüf...
Wire harness for external routing that connects the ST-6770 to the Junction SM-JC40/41 with an additionally required cable EW-SD50. The wire harness a...
This front derailleur clamp is designed to mount Dura Ace FD-9000 F/ 9070 F front derailleurs on frames without braze-on socket.
This front derailleur clamp is designed to mount Dura Ace FD-9000 F/ 9070 F front derailleurs to frames without braze-on socket.
· Ø 34,9 mm
· polished aluminium
· with quick adjustment for the rear derailleur
· with knurled nut to adjust the front derailleur
· suitable for 4 mm and 5 mm...