Schwalbe Clik Valve Conversion Kit SV-SCV incl. Pump Head Adapter for Schrader Pump Heads

Schwalbe Clik Valves were designed to make tyre inflation child’s play. With this kit, you can convert your Presta valves and the pump head of your floor pump to the new standard in not time at all. To do so, the existing valve cores are simply replaced with the Clik Valves. Your pump, too, can be quickly converted to the new standard. The Clik Valve adapter is simply clamped into a Schrader pump head.

All you have to do before inflating the tyre is attach the Clik Valve pump head adapter to the valve. And that's it already! You can start inflating the tyre immediately. The air flow is up to 50 per cent higher than with Presta valves. This is ideal for the initial fitting of tubeless tyres. When you are finished, you can simply pull off the pump head adapter again, without the risk of air loss from the tyre or inner tube.

Details:
• Clik Valve conversion kit for Presta valves
• Replace existing valve cores
• Incl. Clik Valve pump head adapter for converting Schrader pump heads
• Simple inflation by attaching the pump head
• Requires only low operating forces
• No pressure loss when removing the pump head from the valve
• Clik Valve enables up to 50 % more air flow than a Presta valve
• Also compatible with many pump heads for Presta valves*

Technical details:
• Material: aluminium, plastic
• Weight: approx. 5.3 g (valve pair with caps), approx. 17.4 g (valves, caps, pump head adapter)

In the box:
Schwalbe Clik Valve conversion kit, consisting of:
• 1 Schwalbe Clik Valve pump head adapter
• 2 Schwalbe Clik Valves SV-SCV
• 2 valve caps
• 1 x valve key

*Note
If you don't have a pump with a Clik Valve pump head at hand, you can often also use pump heads for Presta valves for the Clik Valve. However, this is not possible in every case.

Manufacturer: Ralf Bohle GmbH, Otto Hahn Str. 1, 51571 Reichshof, Deutschland, www.schwalbe.com