IceToolz Xpert Tap Set

The IceToolz Xpert tap set contains hardened taps for cutting popular thread sizes by hand when installation components on the frame of your bicycle. No matter if you want to thread cut drilled holes for mudguard stays or re-thread damaged threads of derailleur hangers or pedal cranks: The high-strength taps ensure accurate screw connections. The double ended lever of the robust tap wrench lies perfectly in your hands for a good transfer of torque.

Details:
• Hard metal hand tap set
• Workshop quality
• For thread cutting metal after pre-drilling
• Cutting tap with flute
• Wear protection coating made of TiN (titanium nitride) or vaporised (VAP)
• Cuts metric coarse pitch threads and fine pitch threads
• Long tool life
• Precisely adjustable tap wrench
• Comes in a tool pouch with organizer
• Dimensions (pouch): approx. 27.5 x 9.5 x 3.5 cm
• Weight: approx. 615 g
• Material: HSS hard metal (drill), plastic

Sizes (Ø x pitch mm):
• M3 x 0.5 - (dropout alignment screws)
• M5 x 0.8 - (e.g. for bottle cages, mudguard bracket)
• M6 x 1.0 - (brake mount, large mudguard bracket)
• M10 x 1.0 - (derailleur hanger)
• 1/2" x 20 / FG 12.7 left + right - (pedal thread)
• 9/16 "x 20 / G 14.3 left + right - (pedal thread)

In the box:
• 8 taps
• Tap wrench
• Pouch

Note:
Not suitable for carbon! You should generally use cutting oil (e.g. product 49205800) for thread cutting to reduce the friction between cut chips and the cutting edges of the tool and to reduce the required torque.

Manufacturer: Lifu Bicycle Co., Ltd, 4 Lane 11, Tzu Chiang Str., Tucheng District, 23678, New Taipei City, Taiwan, www.icetoolz.com
Responsible person: Buzaglo BV, Rondebeltweg 20, 1329BA, Almere, Netherlands, www.buzaglo.nl