Litemove SC-160 CT1 E-bike Front Light for Rose Slab Plus incl. X-Connect Adapter

The Litemove SC-160 CT1 is a 160 lux bright e-bike front light for the Rose Slab Plus with CT1 connection. The headlight can be connected via the CT1 plug or to other e-bikes using the X-Connect adapter.

Thanks to the handlebar mount supplied, the headlight can be mounted directly on the handlebars. The light cable with a length of approx. 15 cm is connected to the existing light cable underneath the stem. The port is already activated on the Rose Slab Plus so that the light can be switched on and off directly via the Bosch Mini Remote.

With a light output of 160 lux, the SC-160 also impresses on completely unlit paths and ensures reliable vision in the dark. However, it's not just brightness that counts: A light width of up to 12 metres in combination with homogeneous light distribution ensures that the path is evenly illuminated and you can keep an eye on the trail at all times.

Details:
• Compact and bright e-bike headlight for the Rose Slab Plus 
• Can also be used for other e-bikes with CT1 connection or X-Connect if required
• Up to 160 lux lighting power
• ATIR technology combines the advantages of LED lens and reflector
• Enables homogeneous light distribution and high efficiency
• Up to 12 m light width provides a good overview
• Aluminium construction with efficient heat dissipation enables constant luminosity and high durability
• Mount for fork attachment included
• Approved for all e-bikes limited to 25 km/h according to German road traffic regulations StVZO 

Technical details:
• Material: aluminium, plastic
• Installation: handlebar mount (Ø 31.8 mm / 35 mm)
• Power supply: 12 V DC voltage (11 V - 16V )
• Power consumption: approx. 9 watts
• Lamp: LED
• Lighting power: up to 160 lux
• Light modes: 1 (low beam) 
• Protection category: IP 56 (dust- and waterproof)
• Dimensions: approx. Ø 46 x 40.8 mm
• Cable length: approx. 150 mm (power connection)
• Weight: approx. 115 g

In the box:
• 1 LITEMOVE SC-160 CT1 e-bike headlight 
• 1 LITEMOVE headlight handlebar mount for side mounting
• 1 LITEMOVE CT1 to X-Connect adapter cable


Note:
ONLY suitable for e-bikes with CT1 connection such as the Rose Slab Plus or e-bikes with X-Connect connection.

Tip:
The connection is already activated on the Rose Slab Plus. You can switch the light on and off by pressing and holding the plus button on the Bosch Mini remote.

Note:
The front light is compatible with a direct current power source (DC) of 11 to 16 volts. Some e-bikes can provide this, but NOT all do!
For the exact voltage supply of your e-bike lighting system, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!
 

Manufacturer: Litemove, No. 198, Fuya Road, Taichung 40762 , Taiwan, , www.lite-move.com
Responsible person: Litemove Europe c/o futurelectric GmbH, Weissenbrunner Hauptstr. 2, 91227 Leinburg, Germany, info@lite-move.com