ORTLIEB BIKE-PACKER Set Consisting of Two Panniers

Robust bike bags for your next big trip: Thanks to their compact design, the BIKE-PACKER bike bags from ORTLIEB can be used for riding over hill and dale – on your next bikepacking adventure or on a weekend trip with friends.

Practical base feet support the bag’s stand off the bike. The lid closure allows for quick access to the inside of the waterproof rear pannier. In addition, a drawstring dust flap provides extra protection from dust, moisture and snow. A permanently installed inner pocket, consisting of a main compartment and a mesh pocket, ensures a tidy inside of the bag.

Details:
• Two pannier bags, one each for left and right
• With classic lid shape for large packing volume
• With Quick-Lock 2.1 mounting system for racks with a tube diameter of up to 16 mm
• 20-mm hooks separately available as accessories (e.g. for e-bikes)
• Including reducing adapters for tube diameter 8, 10 and 12 mm with anti-scratch function to protect the rear rack
• Upper QL hook and lower sliding hook can be adjusted without tools
• Lower hook rail with anti-scratch function to protect the rear rack
• With integrated inside pocket and shoulder strap
• Symmetric shape allows for use on the right or left side
• Dust flap with easy-to-use drawstring under the lid provides protection against water, dust and snow
• Edge protection prevents spoke contact and abrasion
• Simultaneous use with ORTLIEB Travel-Biker or Trunk-Bag possible
• Reflective design elements
• Easy to clean inside

Note: There are two panniers included in the scope of delivery.

Technical details:
• Dimensions: approx. 42 x 23/32 x 17 cm (per bag)
• Volume: approx. 20 l (per bag)
• Weight: approx. 2080 g (both bags combined)

NOTE: In order to reach protection standard IP54 (5= protection from dust, 4= protected against wheel spray coming from all directions) the lid must be entirely closed.

In the box:
• 1 ORTLIEB Bike-Packer set consisting of 2 bike bags
• With 2 carrying straps (length approx. 75 cm), reducing adapters 8, 10 and 12 mm (2 pairs each)

Highlights & Technologies:

QUICK-LOCK2.1:
The bicycle bag mounting system QL2.1 is based on the proven QL2 system, but has been further upgraded to perfectly fit current pannier rack models.
• Comfortable single-handed operation
• The 16 mm Quick-Lock hooks come with reducing sleeves with anti-scratch function in 8, 10 and 12 mm. For a more secure connection, the reducing sleeves of the QL2.1 are fitted into the base hook from the sides
• For optimal stability the upper hook rail comes in a single-piece design, yet it can be adjusted to fit the either side of the rack on Office-Bag and Downtown models
• A special tightening technique allows the use of particularly flat nut washers on the inside. This makes it almost flat and protects the goods being transported
• The lower hook rail consists of a two-component plastic with anti-scratch function. The contact surfaces are soft to reduce rubbing against the rack tube. The lower hook rail is rotatable in 15-degree steps and adjustable in height.
• All hooks may be adjusted without tools and replaced within seconds
• The upper rail is compatible with optional theft protection systems

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.



Manufacturer: Ortlieb Sportartikel GmbH, Rainstraße 6, 91560 Heilsbronn, Germany, www.ortlieb.com