Racktime SNAPIT 2.0 Adapter Plate with Feet and Lock

The SNAPIT 2.0 adapter plate by racktime securely connects baskets, panniers and other non-racktime bags to your compatible racktime SNAPIT 2.0 rack.

The adapter plate is attached to the underside of your bag so that you can attach it to your SNAPIT 2.0-compatible rack with just one click and release it just as quickly using the release lever.

This equipment variant has a lock to connect the adapter plate to the luggage carrier and thus protect it from theft. In addition, the feet attached to the underside of the adapter plate make it easier for you to put down your basket or bag comfortably.

Details:
• Adapter for racktime SNAPIT 2.0 system surface
• For attaching containers such as bags and baskets (see note below for drilling template)
• Comes with feet for putting it down easily
• Incl. lock to protect against theft
• Up to 12 kg load possible
• Incl. mounting kit

Technical details:
• Material: plastic
• Max. load: 12 kg
• Bolt spacing: 195 mm x 100 mm
• Dimensions: approx. 235 mm (L) x 158 mm (W) x 32 mm (H)
• Weight: approx. 180 g

In the box:
• 1 racktime SNAPIT 2.0 adapter plate with feet and lock
• Incl. mounting kit


Tip:
If your bike is not equipped with the right RACKTIME luggage carrier for the SNAPIT 2.0 mounting system, you can mount the SNAPIT 2.0 CONNECT luggage carrier plate as an intermediate adapter on all standard luggage carriers with round luggage carrier tubes (prod. code 234180501).

Note:
For a drilling template that might be helpful for installation see:
https://www.racktime.com/fileadmin/user_upload/racktime/downloads/montageanleitungen/1727001_RT_Snapit_2-0_Bohrschablone_web_1.0.pdf



Manufacturer: tubus carrier systems GmbH, Virnkamp 24, 48157 Münster, Germany, www.racktime.com