VAUDE Aqua Back Print Single Pannier Bag

The Aqua Back Print Single pannier by VAUDE comes with a fashionable print. The truck tarpaulin material is waterproof and thanks to the wrap-around closure this bag lets rain and spray water simply roll off. The QMR 2.0 fastening system allows flexible and quick mounting on the luggage carrier.

Details:
• Single bike bag with hooks for attachment to the rear rack
• Watertight welded seams
• Water-repellent surface coating lets water roll off
• Waterproof roll closure
• Spacious main compartment
• HARD BACK 2.0 pocket back
• Roll closure closable upwards and downwards
• Removable shoulder strap
• Easily adjustable QMR 2.0 fastening system, lockable by means of a padlock (e.g. ABUS 145/20 aluminium combination lock, optionally available under prod. code 2269016)
• Reflective design elements

Technical details:
• Material: 1000D thermoplastic polyurethane coated, 840D thermoplastic polyurethane coated
• Dimensions: approx. 37 x 33 x 19 cm
• Volume: approx. 24 l
• Weight: approx. 970 g

In the box:
• 1 VAUDE Aqua Back Print Single pannier
• Incl. shoulder strap

Highlights & Technologies:

HARD BACK 2.0:
Hard shell bag back for VAUDE bike bags: The HARD BACK 2.0 is made of sturdy plastic and impact- and abrasion- resistant. The edges were additionally equipped with non-slip feet. The lower guide hook is adjustable by hand and can be rotated freely through 360°. This allows you to individually adapt the bag to almost all luggage rack rails. The backs of the bags are symmetrical and can be fitted on either side of the bike. 
Maximum load: approx. 12.5 kg per bag.

QMR 2.0:
The second generation of the QUICK MOUNT RELEASE (QMR) hook: even easier to use and can be directly locked onto the hook (for example with ABZS 145/20 padlock, optionally available. Thanks to included adapters, the QMR hooks fit a wide range of different tube diameters (8-16 mm). Simply choose the appropriate adapter for your rack, fit it into the QRM hook of the bag, adjust the hook’s position with the horizontal dial if need be and hook the bag on the rear rack with just one click. 

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.

Manufacturer: VAUDE Sport GmbH & Co. KG, Vaude Straße 2, 88069 Tettnang, Germany, www.vaude.com