VAUDE AQUA FRONT (REC) Pannier Set

The name says it all: It is best to place the AQUA FRONT (REC) panniers on your lowrider rack, and water does not affect them. This bag also comes with tried-and-tested features that make everyday life, Sunday tours and cycling trips easier.

Made of PVC free outer material – waterproof welded – this front bag knows how to withstand moisture. The spacious main compartment with a practical inner zip pocket allows for safe and secure transport of your equipment. The QMR 2.0 attachment enables easy attachment and detachment to the rear or front carrier. The roll-top closure of the pannier also ensures a variable volume of up to 14 litres per bag.

Details:
• Two waterproof front bike bags, one each for left and right
• Robust material
• Easily adjustable QMR 2.0 fastening system, lockable by means of a padlock (e.g. prod. code: 2269016)
• For round luggage carrier tubes with a diameter of approx. 8 – 16 mm
• Waterproof roll closure
• HARD BACK 2.0 hard shell bag back with adjustable guide hooks
• Spacious main compartment
• Inner pocket with zipper
• Removable shoulder strap
• Carrying handle
• Reflective design elements

Note: There are two panniers included in the scope of delivery.

Technical details:
• Attachment system: QMR 2.0
• Material:
- Main material: 100% polyester, 1000 D tarpaulin with polyurethane coating
- Secondary material: 100% polyamide, 800 D Mega tarpaulin
• Dimensions: 2 bags with each a size of approx. 31 x 30 x 17 cm
• Volume: 2 bags combined approx. 28 l
• Weight: 2 bags combined approx. 1,580 g

In the box:
• 1 set of VAUDE AQUA FRONT (rec) bike bags
• Incl. shoulder strap

Highlights & Technologies:

QMR 2.0:
The second generation of the QUICK MOUNT RELEASE (QMR) hook: even easier to use and can be directly locked onto the hook (for example with ABZS 145/20 padlock, optionally available. Thanks to included adapters, the QMR hooks fit a wide range of different tube diameters (8-16 mm). Simply choose the appropriate adapter for your rack, fit it into the QRM hook of the bag, adjust the hook’s position with the horizontal dial if need be and hook the bag on the rear rack with just one click. 

HARD BACK 2.0:
Hard shell bag back for VAUDE bike bags: The HARD BACK 2.0 is made of sturdy plastic and impact- and abrasion- resistant. The edges were additionally equipped with non-slip feet. The lower guide hook is adjustable by hand and can be rotated freely through 360°. This allows you to individually adapt the bag to almost all luggage rack rails. The backs of the bags are symmetrical and can be fitted on either side of the bike. 
Maximum load: approx. 12.5 kg per bag.

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.


Manufacturer: VAUDE Sport GmbH & Co. KG, Vaude Straße 2, 88069 Tettnang, Germany, www.vaude.com