Profile A2A High Riser Kit

The A2A High Riser Kit from Profile Design was developed exclusively for the Profile Design Aeria Ultimate handlebar and aerobar combination. It allows you to raise the aerobars together with the armrests to the height required for your sitting position.

The kit has a total of ten risers with three different heights, which can be mounted between the basebar and the handlebar attachment using the corresponding fastening screws. An increase of up to 80 mm is possible. The set also includes the A2 bridge, which should be installed additionally if the raise is 40 mm or more.

Details:
• Riser kit especially for the Profile Design Aeria Ultimate handlebar and aerobar combination
• Enables the handlebar attachment to be raised in height to optimise the seating position
• Set consisting of ten risers in three different heights (5, 10, 20 mm)
• Incl. A2 bridge for raises over 40 mm
• Compatible with optional A2-A3 adapters

Technical details:
• Material: aluminium
• Compatibility: Profile Design Aeria Ultimate
• Riser heights: 5, 10, 20 mm
• Minimal increase: 5 mm
• Maximum increase: 80 mm
• Weight: approx. 770 g (60 mm increase)

In the box:
Profile Design A2A High Riser Kit consisting of:
• 2 risers (5 mm)
• 2 risers (10 mm)
• 6 risers (20 mm)
• 1 A2 bridge (5 mm)
• 4 mounting screws (75 mm)
• 4 mounting screws (80 mm)
• 4 mounting screws (85 mm)
• 4 mounting screws (90 mm)
• 4 mounting screws (95 mm)
• 4 mounting screws (100 mm)
• 4 washers








Manufacturer: Profile Design LLC, 2677 El Presidio Street, Long Beach, California 90810, USA, www.profile-design.com
Responsible person: Grofa Action Sports GmbH, Otto-Hahn-Str. 17, 65520 Bad Camberg, Germany, www.grofa.com/de/contact-de/